









OV Supplies · OVS-LE-600
A cabinet the litter tray disappears into, with two open shelves above it. The lower box is 599 × 500 mm in plan and 500 mm high, sized for most standard trays, and has a 200 × 239 mm arched entry, ventilation holes, a scratching board inside and a hook for the scoop. The door has a magnetic catch and swings wide for cleaning. Above it a steel frame carries two shelves and two fabric baskets. Ships flat and pre-drilled.
Free delivery to most of NSW, ACT, VIC, QLD, SA and WA; postcode confirmed at checkout. Return within 30 days in the original packaging for a full refund.
Ships flat. The panels are pre-drilled and the fixings and manual are in the carton. Build the cabinet first and stand it upright, then add the steel frame and the two shelves.
A cabinet the litter tray disappears into, with two shelves and two baskets doing ordinary work on top.
From the outside it is a 1270 mm unit in pale natural board: a closed cabinet at the bottom, then a black steel frame carrying two open shelves and two fabric baskets. Photo frames, a lamp, a pile of magazines, the dry food container. The top is rated to 60 kg, so anything you would happily put on a hall table belongs there, and nobody walking past reads it as pet furniture.
The cabinet below is where the tray lives. There is a 200 × 239 mm arched entry on one side, ventilation holes through the board, a scratching board inside and a hook for the scoop. The door has a magnetic catch and opens wide, so cleaning out means lifting the tray straight forward rather than reaching around a hood.
What this usually leaves the warehouse with.

The magnetic catch means no handle to catch a sleeve on and no latch to fiddle with when your hands are full of scoop and bag. Pull it open and the tray lifts straight out. Inside there is a scratching board, a hook for the scoop and ventilation holes through the board, so air moves rather than sitting still behind a closed door.

Above the cabinet, a black steel frame 770 mm tall and 260 mm deep carries two open shelves and two fabric baskets, each 279 × 279 × 150 mm. The baskets take the things that otherwise live on the floor beside the tray: spare liners, a brush, a bag of dry food. The top is rated to 60 kg, which is more than a small television.

The natural finish and the plain steel frame put it somewhere between a console table and a shelf unit. It works against a living room wall, in a bedroom corner, in a hallway or beside a window. The surface is smooth and waterproof, so it wipes clean, and at 599 mm wide it takes up about as much floor as a bedside table.
Load the shelves evenly and keep the heaviest thing over the cabinet rather than out at the edge of a shelf.
One size, one finish. The cabinet takes up 599 × 500 mm of floor and the shelf frame carries the height to 1270 mm.
| Finish | Footprint | Overall height | Entry | Price inc. GST | Availability |
|---|---|---|---|---|---|
| Natural | 599 × 500 mm | 1270 mm | 200 × 239 mm | AU $139 | In stock |
Ships flat. The panels are pre-drilled, so it is a screwdriver job rather than a drilling one.
The cabinet measures 599 × 500 mm on the outside and 500 mm high, and it is built from 12 mm board, so allow roughly 24 mm off the width and depth for the panels. Most standard open and hooded trays go in. Measure yours first if it is an extra-large or a top-entry model.
Yes. The panels are pre-drilled and the fixings and manual are in the carton. Build the cabinet first, stand it upright, then fit the steel frame and the two shelves. One person can manage it, though a second pair of hands helps at the frame stage.
16.6 kg assembled, in 12 mm MDF with a steel shelf frame. The awkward part is the height rather than the weight: at 1270 mm it is easier to build in the room it is going to live in than to carry it through a doorway afterwards.
There is a single arched entry, 200 × 239 mm, plus the door itself. Cats vary on this. If yours is cautious, prop the door open for the first week so there are two clear exits, then close it once they are using the cabinet without hesitating.
Open the door, lift the tray straight out and sweep or vacuum the base. The surface is smooth and waterproof, so a damp cloth and a mild detergent handle the rest. Keep standing water off the cut edges of the board, which is where MDF swells if it is going to.